External Safety Gates

Our lightweight external safety gates are manufactured from High Density Poly-ethylene ABS and are superior quality, provide high visibility and are instantly recognisable. Although usually delivered in safety yellow the gates may be delivered in a variety of colours according to customers requirements. Most importantly, with a target weight of 25kg ESG’s gates comply with OHC recommended safe lifting limits.

The 4-piece gate consists of 2 hinged side panels, a frame and door and a roof section. The hinged side panels enable the gates to be installed to enclose shaft openings of various dimensions.

The external gates are secured to the building by dynabolts. Thick, secure wire mesh on the panels and door ensures ventilation and visibility and secure access to the gate is via a lockable front door.
The entire gate folds flat to a height of less that 125mm.

Internal Safety Gates

ESG’s internal safety gates are manufactured from aluminium and fully integrate with our external safety gates. The internal gates are secured to the building via dynabolts. Safety Gate Installation and Removal

ESG’s experienced, fully trained installation teams perform the initial installs of our internal and external gates on site and  the final removal of gates from the site. They also perform reassignment of installed gates from one opening to another as work progresses from floor to floor.

Whilst safety is our priority these teams also work to minimise on-site disruption. Depending upon Your company’s requirements our teams can also remove existing safety barriers prior to installing internal and external gates.

Comprehensive details of the activities performed by these teams in relation to the safety gates are recorded and transparency of these activities enables transparent and auditable billing with your company.